Send
this page to a friend
How To Choose The Perfect Granite Work Surface
by: Edward Green
My Grandmother used to say to me Nothing cheap is good and
nothing good is cheap. This ring true when dealing with the
purchase especially on the internet of Granite Work Surfaces. In
fact of all stone so read carefully.
Natural stone is graded as to its suitability for a given
task. It is also graded regarding the region of the world it originated
from. This is a grade for general use but more for stone professionals
to advise architects, surveyors etc which products to use for maximum
efficiency in the building or home.
When buying on the internet you are usually shown samples of the
very best, Granite, Marble, Limestone etc. You must be aware that
this stone is probably not what you will receive. Firstly, the stone
is batched. You need batched stone to get the consistent pattern
throughout the surface. If you were to buy stone today and return
for stone a month later to complete your project you will invariably
get a mismatch that can look horrendous especially with the larger
crystals such as blue pearl granite.
Always make sure you are receiving the same batch and have it itemised
on your order. Also if the installer chips a corner or scratches
the surface you will generally need a replacement piece. If the
batch isnt available you may have a problem.
I have received numerous calls lately concerning the fading of
black granite counter tops. Black granite should not fade. Black
granite imported from Asia is sometimes doctored with dyes and oils
to darken the surface. The fading is nothing more than the dyes
and oils being removed. Unfortunately, the only fix is to re-polish
the top. This can be costly.
Before purchasing a granite top perform the following test to find
out if it has been doctored.
Get a clean white cloth and apply some acetone (nail varnish remover)
to the surface of the granite. If any residue or black color is
observed on the top, do not accept it, it has been dyed.
Take a piece of the "granite" you want to test and spill
a few drops of lemon juice onto it. If you see that under the drops
of lemon it develops very quickly dark spots, it means that it's
a very absorbent stone and I would advise you against it. If it
takes, say, a minute or so to be absorbed, then you're dealing with
a level of absorbency that's easily controllable with the application
of a good quality impregnating sealer.
So, in short be careful where you place your order and always seek
specialist advice. The void between a good stone and a bad stone
is huge, the price between a good stone and a bad stone is smaller
than you think but can be costlier.
About The Author
Edward Green owns and operates the highly successful Marble Master
Ltd company. Marble Master specializes in Restoration and Refinishing
of all types of natural stone and consultancy services to Architects,
Restoration Companies and Interior Designers.
Website: http://www.marblemasteruk.com/
|